CLIP-IT® installation instructions
How to use Corner Brackets on nib walls and stairs.
Sit the bracket above the tile at the external corner, with compatible CLIP-IT® clips and wedges on both sides.
- Application
- Nib walls & stairs
- Position
- Above the tile
- Colour
- Clear
Before you start
Check the corner and compatible parts.
Check the nib wall or stair corner
Confirm the tiles, corner layout and compatible CLIP-IT® clip and wedge setup before applying adhesive.
Prepare the adjoining faces
Prepare the base and apply suitable tile adhesive following its manufacturer’s instructions.
Have the compatible parts ready
Use the Corner Bracket with compatible clips and wedges on both sides of the external corner. The bracket sits above the tile.
Using the product
Position. Hold the corner. Allow curing.
Use the bracket above the tile, then let the compatible corner setup hold the tiles while the adhesive cures.
Set out the corner tiles
Position the adjoining tiles at the nib wall or stair corner and keep the intended joint consistent.
Use compatible CLIP-IT® clips and wedges for the tile thickness and joint.
Sit the bracket above the tile
Place the Corner Bracket above the tile at the external corner.
Use it with the compatible clips and wedges on both sides to hold the tiles in position. Check the corner alignment before curing.
Let the adhesive cure
Leave the compatible corner setup in place until the adhesive has cured, following its manufacturer’s instructions.
The brackets are reusable. Contact CLIP-IT® if you need help releasing the particular setup after curing.
Complete the setup
Complete your setup.
Use the compatible CLIP-IT® products for this guide.
1.5 mm white tile clips
Use a compatible clip that suits the tile thickness and joint.
Reusable tile levelling wedges
Use compatible wedges with the corner clip setup.
A few useful answers
Get the details right.
Above-tile placement, compatible parts and bracket reuse.
Where are Corner Brackets used?
Use them on nib walls and stairs, and other compatible external tile corners.
Where does the bracket sit?
The bracket sits above the tile at the corner, used with compatible CLIP-IT® clips and wedges on both sides.
Do they replace the tile clips?
Use the brackets with the compatible clips and wedges as part of the corner setup.
Can the bracket be reused?
Yes. Keep the bracket for another compatible corner installation.
Where can I check the fitting method?
Contact CLIP-IT® with the tile thickness and a photo of your corner setup if you need help with bracket engagement or release.
Talk to the people who make it
Need a hand with your installation?
Tell the CLIP-IT® team your material thickness, joint width and what is happening so we can help you check the setup.