Made for tile edges
Position along the tile edge in brick bond, subway tile, herringbone, staggered and offset layouts.
Made for patterned layouts
3 mm brick & herringbone tile clips
Defined joints for distinctive patterns.
A light grey clip for brick bond, subway tile, herringbone, staggered and offset wall and floor layouts. Position along the tile edge and pair with compatible CLIP-IT® wedges for defined 3 mm joints while the adhesive cures.
- Grout joint
- 3 mm
- Colour
- Light Grey
- Placement
- Along the tile edge
Australian made on the Gold Coast. Available through CLIP-IT® stockists.
Designed for the way you work
Give your pattern room to stand out.
Defined joints and cleaner alignment for patterned wall and floor layouts.
Consistent 3 mm joints
Maintain a wider, even grout joint between adjoining tiles. Compatible wedges hold the alignment while the adhesive cures, helping reduce lippage.
Patterns with purpose
For splashbacks, feature walls, bathrooms, kitchens and decorative wall and floor layouts.
A clean break
Designed to break away at the base after the adhesive has cured.
Product details
The details, ready for your project.
Check the joint width, layout and pack size before you start.
Work out what you need.
Enter your tile dimensions and project area in the CLIP-IT® Calculator to estimate your clip quantities.
At a glance
- Grout joint
- 3 mm
- Colour
- Light Grey
- Application
- Wall and floor tiling
- Tile types
- Ceramic, porcelain and common wall and floor tiles
- Tile layouts
- Brick bond, subway, herringbone, staggered and offset
- Clip placement
- Along the tile edge
- Manufacture
- Australia
Available pack size
- Box
- 250clips
Check pack availability with your nearest stockist.
Find a stockistComplete the system
Compatible wedges & tools.
Pair your clips with CLIP-IT® wedges and the tools designed around your installation.
Before you get started
A few useful answers.
Using your 3 mm brick & herringbone tile clips.
What does 3 mm refer to?
It refers to the grout joint spacing created by the clip, rather than the thickness of the tile.
Which tile layouts are these clips designed for?
Use them for brick bond, subway tile, herringbone, staggered and offset or patterned layouts. They are positioned along the tile edge rather than at a four corner intersection.
Which wedges and tools can I use?
Pair these clips with compatible CLIP-IT® Wedges or Mini Wedges. Tile Pliers and the DE-CLIP-IT Hammer are also part of the compatible range. Explore the compatible wedges and tools for product details.
When should I remove the clips?
Remove the clips after the tile adhesive has cured, following the adhesive manufacturer’s curing instructions. The clips are designed to break away cleanly at the base.
How many clips will I need?
Use the CLIP-IT® Tile Clip Calculator to estimate your requirements from your tile dimensions and project area.
Which pack sizes are available?
These clips are available in a box of 250 clips. Check pack availability with your nearest stockist.